VECTOR 800 OFF ROAD
800 kg (1800 lbs)
The Vector 800 Off Road is designed to allow installers to unload, transport, and install large pieces of material with extreme precision.
- Lifting capacity up to 800kg (1800lbs)
- Dual pump vacuum system as a safety feature
- Robotic lifting machine
- Hydraulic rams for durability with precision
- Remote control allows for precise material movement
- 450mm (16”) wheels all round is ideal for on-site work
- Variable hydraulic speed Dial
- Both wired & wireless remote controls
- Six degrees of movement:
- 360-degree rotation
- 200mm (8″) side shift
- 20-degree side pivot – left + right (by remote) and 90-degree left side pivot (manual)
- Vertical lift to 4000mm (160″)
- 100-degree tilt range
- 2000mm (80″) forward extension in front of machine
Suitable Materials Include:
- Glass
- Granite/Marble/Stone
- Porcelain
- Steel
- Wood doors
- Plastics
- Composite panels
- Vacuum cups and modified frame to lift curved material
- Foam vacuum pads for stone
- Electric lifting winch with hook
- Front lifting hook
- Purpose built trailer
|
|
|
Dual front wheels |
Vector 1800 XR available for extra reach (4400mm) |
SPECIFICATIONS
Capacity: 800kg | |
Wired and Wireless (30mtr range) remote controls allow for precise glass movement | |
Hydraulic System: 24v / 1300watts | |
Battery: 2x 150 AMP HR | |
Charger: 110 - 220v x 20 AHr | |
Vacuum Pumps: 2 x 24V, 35 lit/min | |
Vacuum cup range - 1450mm - 2050mm | |
Vacuum cup range - 1450mm - 2050mm | |
No-Load Lifting: 18mm/s | |
No-Load Climbing: 8% Gradient | |
SIDE SHIFT - 110mm | |
Hydraulic rotation: 360° | |
Two front 18” puncture proof wheels
(Option for two more) | |
Two rear 18” solid filled wheels | |
Outer wheels can be added for extra stability/traction | |
Backup wired remote control | |
Machine Weight: 1150kg, Counterweights: 550kg |
TESTIMONIALS
Read More
Just a quick note to say what a great piece of equipment. As I am a glazier that has a buggered back and now confined to the shiny seat in the office I reckon if the Nomad was around 25 years ago I would still be glazing commercial. We have just done our first two reglazes both 12.38 laminate 2400 x 3400 aprox 1000 off the ground in a local shop front. Last time it took 3hrs and 6 men to reglaze 1 panel only including scaffold and back pain. This time 4 people and the Nomad, no scaffold and 2 panels took 1 hour including loading the old 12.38 lam on the truck!!!!!! Possibly could have used 3 people but being the first time, are to be sure to be sure! Instant success and the knockers are now believers!! We set a frame approx 2 mtrs square up in the factory and used a piece of 8.38 lam for practice and used 6 people to glaze the panel two times each as a training session before tackling possibly the biggest reglazes in town. Thanks for the prompt service and I will recommend this machine and your business anywhere anytime. Regards extremely happy” Kym Wilson
