800 Kg (1800 Lbs)

The Vector 800 XR is glazing robot with three stage boom giving extra reach. It is designed to allow a glaziers to unload, transport and install large plates of glass with extreme precision.

  • Lifting capacity up to 800kg (1800lbs)
  • Adjustable Outriggers for stability
  • Dual pump vacuum system as a safety feature
  • Robotic glazing machine
  • Hydraulic rams for durability with precision
  • Remote control allows for precise glass movement
  • 450mm (16”) wheels all round is ideal for on-site work
  • Variable Hydraulic Speed Dial
  • Both wired & wireless remote controls
  • Six degrees of movement:
    • 360 degree rotation
    • 200mm (8″) side shift
    • 90° side pivot to the left by remote
    • 20° side pivot to the right by remote
    • Vertical lift to 4400mm (174″) to centre hub
    • Vertical lift to 5400mm (214″) to top vacuum cup
    • 100° tilt range
    • 2200mm (88″) forward extension in front of machine

Can also handle:

  • Composite panels
  • Steel
  • Granite/Marble
  • Plastics
  • Wood doors
  • Vacuum cups and modified frame to lift curved glass
  • Foam Vacuum Pads for Stone
  • Electric lifting winch with hook
  • Front lifting hook
  • Purpose built trailer

Vacuum cups and modified
frame to lift curved glass (in-line cups to lift the spine of the curved glass)

Foam Vacuum Pads
for Stone


Dual front wheels



Capacity: 800kg
Wired and Wireless (30mtr range) remote controls allow for precise glass movement
Hydraulic System: 24v / 1300watts
Battery: 2x 150 AMP HR
Charger: 110 – 220v x 20 AHr
Vacuum Pumps: 2 x 24V, 35 lit/min
Vacuum cup range – 1450mm – 2050mm
Vacuum cup range – 1450mm – 2050mm
No-Load Lifting: 18mm/s
No-Load Climbing: 8% Gradient
SIDE SHIFT – 110mm
Hydraulic rotation: 360°
Two front 18” puncture proof wheels (Option for two more)
Two rear 18” solid filled wheels
Outer wheels can be added for extra stability/traction
Backup wired remote control
Machine Weight: 1150kg, Counterweights: 550kg


Kym Wilson
Kym WilsonBayview Glazing QLD AUSTRALIA
Read More
Just a quick note to say what a great piece of equipment. As I am a glazier that has a buggered back and now confined to the shiny seat in the office I reckon if the Nomad was around 25 years ago I would still be glazing commercial. We have just done our first two reglazes both 12.38 laminate 2400 x 3400 aprox 1000 off the ground in a local shop front. Last time it took 3hrs and 6 men to reglaze 1 panel only including scaffold and back pain. This time 4 people and the Nomad, no scaffold and 2 panels took 1 hour including loading the old 12.38 lam on the truck!!!!!! Possibly could have used 3 people but being the first time, are to be sure to be sure! Instant success and the knockers are now believers!! We set a frame approx 2 mtrs square up in the factory and used a piece of 8.38 lam for practice and used 6 people to glaze the panel two times each as a training session before tackling possibly the biggest reglazes in town. Thanks for the prompt service and I will recommend this machine and your business anywhere anytime. Regards extremely happy” Kym Wilson